Burglar Alarm System

Posts Tagged ‘Home’

• Easy-to-use and cost-effective D.I.Y. (do-it-yourself) wireless intruder alarm system kit
• Supports up to 60 wireless sensors (15 wireless defense zones and 4 wireless sensors per zone)
• Transmit at 430-433MHz frequency band, wireless transmitting distance up to 300/450 feet
• Supports up to 5 phone numbers for auto alarm call and 1 management center protocol (CID)
• Armed/disarmed by remote controller, phone call, or host¿s keypad

Product Description
Macally SecurityMan Air-Alarm is a state-of-the-art wireless alarm system kit for homes and businesses. It is user-friendly easy to use protecting homes/businesses at a minimum cost of investment. Do-It-Your-Self installation and self-monitoring alarm system without monthly fees is a key benefit for users. The system will alert by phone calls to owner through a series of enlisted phone numbers. The owner can then dial into the host to armed or disarmed using the phone¿s numeric keypad. Air-Alarm system can be upgraded by adding up to 60 wireless sensors, sirens, and up to 8 remote controllers.

Macally Air-Alarm Securityman DIY Wireless Home Alarm System

Do you think they would be an effective line of defense for my apartment that is on the slightly rougher side of town?

I have a sliding glass door downstairs with an easily accessible patio facing the street.

Any tips for intruder prevention here would be helpful but mainly regarding hardware and these wireless systems.

Thank you!!!!!

Why would someone not get a Burglar Alarm if they truly want to protect their lovely home? It is not only a question of safety but the feeling of having done the best for your family and yourself. Gone are the days when burglar alarms were considered something for the rich. Nowadays they are cheap and affordable. I have read and written quite a few articles on home security and am an advocate for having one installed. If you are looking for a wireless home security system, here is a good resource – Monitored AlarmForce home security systems with live 2-way voice communication free with every system and special line-cut technology www.alarmforce.com

If you have bought a home that doesn’t currently have an alarm system then many people will tell you that you have no choice but to have a wireless alarm system installed. The logic is simple and that is that it is just too expensive to have someone hardwire a home that is already built for an alarm system. The problem with wireless systems however; is that they are vulnerable to “false alarms” due to outside radio sources.

One option is to do the wiring work yourself. However; be forewarned that it can be a daunting task that will take some time to complete. The problem with wiring a home that is already built is that everything is in the way. Walls are sheetrocked and finished and the attic is full of insulation and duct work.

If you can get under your home you may be able to run the alarm wiring under your floor rather then your attic. Another option is to run your wiring under carpeting and behind baseboards along the walls in your home. When you have to run wiring from inside your home up into your attic, do it from inside of closets where any wall or ceiling damage will be least visible.

Its the exterior windows that you are going to have the most problems with. You can remove a window from the frame and drilll up into your attic but even then you are going to have to access the wire in a very tight space. Consider using a ladder to knock out an eve block, which will give you outside access to this confined work space

It can be done and in fact people do it all the time but it is definitely a labor intensive job. Also, there is no doubt about it and that is that you are going to be left with some walls to patch and paint, carpet to reinstall and repairs on anything else that you remove or damage along the way.

I opened the door then punched in the number and left. Someone said that is not how you leave. I didn’t hear anything bad. Did i set the alarm off?
Someone explain to me how i come and go with a home alarm system in the household.

Most people are capable of installing a home security burglar alarm system. All you need to do is to thoroughly map out the key points before you embark on the project. The very first step is to determine the type of system you want to install, analyzing what specific features you wish to include in the system. Next you prepare the tools and materials you will need for the installation ensuring that you have ample screws and cabling available.

For most homeowners choosing the right home security burglar alarm system is quite simple as they are content with having a system capable of deterring potential intruders from attempting a break in. Others, however, may focus on installing a system designed to catch an intruder in the act of actually breaking into the premises.

An option, which is high on the priority list for many people, when choosing the right home security burglar alarm system is that it includes a silent alarm connected to a monitoring service that notifies the security company that a break-in is in progress. Whilst this option is ideal for catching criminals in the act it can place the homeowner and their families at increased risk. The risk factor increases purely because the intruder is unaware that the silent back to base alarm has been activated and they proceed to break-in. If they are able to gain entry while the security company initiates a response they can affront the occupants. Often their response, when they realize the break-in has been reported to authorities, is extremely dangerous to the occupants and on occasions has resulted in hostage situations occurring.

A much safer option when choosing the right home security burglar alarm is to replace the silent alarm with one that emits a loud siren the moment the security system has been breached. The activation of a warning alarm will, in all probability, scare the intruder away thus leaving the homeowner and family less exposed to the risks of a confrontation with the intruder.

Figure Out What Needs To Be Protected

Before you go about choosing the right home security burglar alarm system you need to determine the extent of the security required. Firstly, it is recommended that you review the exterior perimeter of your home and look for points of entry. Beyond the obvious doors and windows it is important to consider other access points such as basement windows and crawl spaces as well as external basement doors.

When wiring a home security burglar alarm system make sure the wires are well hidden and inaccessible from any point outside the home. As many of the systems use a dial-up back to base system to notify authorities of an alarm’s activation, it is important to ensure that the phone lines cannot be cut from outside as the alarm will be of absolutely useless if it is unable to get a dial tone when activated.

Choosing the right home security burglar alarm system is relatively simple if you consider all important aspects, however, if you are unable to work out what is best in your particular situation you can always call in an expert for further input and professional advice.

If you’ve chosen to protect your family with a wireless home alarm system, you’ve already taken the first step towards total security.  However, the journey does not end there.  To get everything in order, you have to back up the main components of your alarm with the proper accessories.  Besides technology, you will also need to remember the human element, making sure you haven’t left out a last line of defense.  Here are five ideas for setting up your wireless home alarm system the right way.

1. Position your motion sensors wisely.  No matter what type of home security plan you have in place, if you haven’t done the right thing with the motion sensors, you will be putting everyone at risk.  Cover the important zones close to staircases (at both bottom and top) and remember that ground floor windows should probably have them nearby, as window break sensors can’t be counted on in every capacity.  No matter how someone gets inside, you should know what is taking place in your home.

2.  Get the glitches out of the way.  You will have a few kinks to work out in the beginning, but if you manage the alarm installation and testing properly, you won’t have a problem later.  Make sure your wireless alarm can detect the presence of a pet and won’t be due for updates any time in the near future.  If your home alarm attracts the attention of the police too often without reason, you may end up being responsible for fines because of public disturbances.

3. Make your keypad the master control system.  You will end up with a lot of different elements in your wireless system, but you’ll be wasting your time if you cannot control them from a single place.  Your alarm’s control pad should detail the activity taking place around your property, from motion and window sensors to smoke and poison control devices.  Simplicity is definitely helpful, but take the time to master the system of the more complicated models, too, because it is an invaluable resource.

4. Go wireless with your cameras.  Covering a lot of ground is a big challenge for home alarm systems, but you can use wireless technology to help you out on all fronts.  Wireless surveillance cameras can be installed on hard-to-see corners of your home and let you keep an eye on things when you hear a noise and want it identified safely.  Watching footage being taken by your camera is normally as easy as logging in to check your email.

5. Get your monitoring plan together.  If a tree falls in the woods and no one is there to hear it, does it make a sound?  The same applies to your wireless alarm system.  Unless you have a monitoring service intact and know the protocol once they call your home, it’s like having no protection at all.  Make sure your alarm is being monitored.

Posted in Info | Tags: alarm, Home, Making, Moves, Right, system, Wireless | No Comments »